Fitur
Informasi Dasar
Tempat asal:
CINA
Nama merek:
OEM
Sertifikasi:
CE Certification
Nomor model:
OEM
Dokumen:
Brosur Produk PDF
Syarat Pembayaran & Pengiriman
Kuantitas min Order:
Bisa dinegosiasikan
Harga:
Bisa dinegosiasikan
Kemasan rincian:
Karton, palet, kotak kayu atau sesuai dengan persyaratan paket pelanggan
Waktu pengiriman:
30 hari kerja
Syarat-syarat pembayaran:
Setoran 30% + 70% T/T Sebelum pengiriman
Menyediakan kemampuan:
20 set per bulan
Galeri
Fully Automatic Vacuum Sintering Furnace With PLC Control Resistance Heating
Deskripsi produk
Fully Automatic Vacuum Sintering Furnace With PLC Control Resistance Heating
Vacuum Sintering Furnace Application
Vacuum Sintering Furnace Widely used in powder metallurgy injection molding (MIM) sintering, rare earth permanent magnet materials, hard alloys, ceramic materials, titanium alloys and other materials vacuum sintering and diamond tool sintering (welding) and vacuum heat treatment process. The series of furnace type structure is mature and practical, and the furnace type and configuration are more. It is a general-purpose equipment used in the field of powder metallurgy sintering.
Vacuum Sintering Furnace Technical parameters :
- Inflation pressure ≤ 0.1MPa (absolute pressure)
- High vacuum/medium vacuum configurations are available freely depending on material process requirements. (This item is user selectable)
- The control of the equipment is automatic control throughout the whole process. Automatic and manual operation can achieve bumpless switching. The vacuum degree, temperature and heating power can be automatically recorded during the operation of the equipment, and the data in the production process can be viewed at any time. The device is controlled by a combination of a touch screen and a programmable controller (PLC) for easy and intuitive operation.
- The main components of the control system are brand-name products to minimize the failure rate.
- The control system is equipped with alarm functions such as over-temperature, over-pressure and water-breaking. The system can automatically process according to the needs, which can reduce the damage to the equipment and ensure the safety of personnel.
- The temperature control system uses Japan Island Electric.
| Volume (L) | 36 | 96 | 175 | 432 | 784 |
| Effective heating zone (mm) | 300X300X400 | 400X400X600 | 500X500X700 | 600X600X1200 | 700X700X1600 |
| Limit temperature (°C) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Power (KW) | 60 | 90 | 150 | 210 | 300 |
| heating method | Resistance heating | ||||
| Vacuum system | Slide valve pump + Roots pump or increase diffusion pump as required | ||||
| Rated heating voltage (V) | According to the design, configure the transformer | ||||
| Vacuum limit (Pa) |
2×10-3Pa
|
||||
