特徴
基本情報
支払いと配送条件
最小注文数量:
交渉可能
価格:
交渉可能
パッケージの詳細:
カートン,パレット,木製のケース,または顧客のパッケージの要求に応じて
受渡し時間:
30営業日
支払条件:
出荷前に30％のデポジット + 70％t/t
供給の能力:
月あたり20セット
ギャラリー
Resistance Heating Industrial Sintering Furnace With Slide Valve And Roots Pump
製品説明
Resistance Heating Sintering Furnace Powder Metallurgy With Slide Valve And Roots Pump
Application of Resistance Heating Vacuum Sintering Furnace :
Resistance Heating Vacuum Sintering Furnace Widely used in powder metallurgy injection molding (MIM) sintering, rare earth permanent magnet materials, hard alloys, ceramic materials, titanium alloys and other materials vacuum sintering and diamond tool sintering (welding) and vacuum heat treatment process. The series of furnace type structure is mature and practical, and the furnace type and configuration are more. It is a general-purpose equipment used in the field of powder metallurgy sintering.
Technical parameters and specifications:
- Inflation pressure ≤ 0.1MPa (absolute pressure)
- High temperature metal/graphite material heating system selection to facilitate different material requirements. (This item is user selectable)
- Low-pressure control device to meet special atmospheric process requirements (such as inhibiting the volatilization of alloying elements).
- High vacuum/medium vacuum configurations are available freely depending on material process requirements. (This item is user selectable)
- The control of the equipment is automatic control throughout the whole process. Automatic and manual operation can achieve bumpless switching. The vacuum degree, temperature and heating power can be automatically recorded during the operation of the equipment, and the data in the production process can be viewed at any time. The device is controlled by a combination of a touch screen and a programmable controller (PLC) for easy and intuitive operation.
- The main components of the control system are brand-name products to minimize the failure rate.
- The control system is equipped with alarm functions such as over-temperature, over-pressure and water-breaking. The system can automatically process according to the needs, which can reduce the damage to the equipment and ensure the safety of personnel.
- The temperature control system uses Japan Island Electric.
| Volume (L) | 36 | 96 | 175 | 432 | 784 |
| Effective heating zone (mm) | 300X300X400 | 400X400X600 | 500X500X700 | 600X600X1200 | 700X700X1600 |
| Limit temperature (°C) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Power (KW) | 60 | 90 | 150 | 210 | 300 |
| heating method | Resistance heating | ||||
| Vacuum system | Slide valve pump + Roots pump or increase diffusion pump as required | ||||
| Rated heating voltage (V) | According to the design, configure the transformer | ||||
| Vacuum limit (Pa) |
2×10-3Pa
|
||||
