特徴
基本情報
支払いと配送条件
最小注文数量:
交渉可能
価格:
交渉可能
パッケージの詳細:
カートン,パレット,木製のケース,または顧客のパッケージの要求に応じて
受渡し時間:
30営業日
支払条件:
出荷前に30％のデポジット + 70％t/t
供給の能力:
月あたり20セット
ギャラリー
Induction Type Vacuum Sintering Furnace With PLC Centralized Control Durable
製品説明
Induction Type Vacuum Sintering Furnace With PLC Centralized Control
Vacuum Sintering Furnace Application:
Inductive vacuum sintering furnace is mainly used for sintering of vacuum and atmosphere sintering of silicon carbide, ceramics, cemented carbide, powder metallurgy, tungsten, molybdenum, alumino-nickel-cobalt permanent magnet, Smco5, Sm2co17, aluminum alloy shed, titanium alloy and other alloy materials. According to the needs of the sintering process time, a single set of power supply can be used to configure multiple electric furnaces, and the individual furnaces are respectively energized to heat up and power off and cool down to achieve continuous operation.
Technical feature of vacuum sintering furnace:
1. Adopting special furnace inner liner structure and heater arrangement, it has good uniformity of the furnace temperature.
2. Adopting special structure for the degreasing chamber, efficiency sealing, completely degreasing and no pollution to the inner element.
3. Vacuum sintering furnace has flexible vacuum pumping, vacuum sintering, micro positive pressure sintering, partial pressure sintering, micro positive degreasing, and other functions;
4. Adopting the most advanced heat insulation structure and materials, good heat insulation performance of furnace liner, less heat, more than traditional design energy saving 25%.
5. Adopting touch screen operation, PLC centralized control, simple operation, high reliability.
6. Vacuum sintering furnace has the alarm function of ultra-temperature and ultra-voltage, mechanical and automatic for pressure protection action, interlocking functions, high safety equipment.
7. Vacuum sintering furnace has remote operation,remote fault diagnosis and remote software upgrades and other function.
Main Specifications
Maximum operating temperature: 2450 ° C
Common temperature: 2400 ° C
High temperature zone volume: 200-2000mm × 300-4000mm; or square
Heating method: induction heating
Working gas in the furnace: nitrogen argon
Temperature uniformity: ≤ ± 10 ° C
Temperature control: PID intelligent program control and manual control
Temperature control accuracy: ±1 °C
| Volume (L) | 192 | 350 | 484 | 1920 |
| Rated temperature (°C) | 2400 | 2400 | 2400 | 2400 |
| Limit temperature (°C) | 2450 | 2450 | 2450 | 2450 |
| Effective heating zone (mm) | 400X400X1200 | 500X500X1400 | 550X550X1600 | 800X800X3000 |
| Power (KW) | 150 | 250 | 350 | 800 |
| Frequency (HZ) | 1500 | 1000 | 1000 | 1000 |
| Temperature control method | Japan Island Electric Thermostat | |||
| heating method | Induction heating | |||
| Vacuum system | Rotary vane vacuum pump or spool type vacuum pump + Roots vacuum pump (vacuum degree requirement with high oil distribution diffusion pump) | |||
| Sintering atmosphere | N2, Ar2, etc. | |||
| Rated power supply voltage (V) | 380 | |||
| Rated heating voltage (V) | According to the design, configure the transformer | |||
| Vacuum limit (pa) | 6X10ˉ2 (vacuum cold state) | |||
Main configuration of powder metallurgy vacuum sintering furnace:
Furnace door: Rotary hinge locking; manual / automatic lock tight
The application field of vacuum pressure sintering furnace:
The purpose of the vacuum pressure sintering furnace is manufacturing of cemented carbide tools by the removal of adhesive from pressed forms, solid-phase sintering in vacuum and protective atmosphere (argon, hydrogen) and sintering in the presence of liquid phase with application of pressure.
Powder metallurgy sintering furnace is mainly used in copper tungsten alloy, heavy gravity alloy, molybdenum alloy, titanium alloy and hard alloy and other products of the degreasing and sintering.
