特徴
基本情報
支払いと配送条件
最小注文数量:
交渉可能
価格:
交渉可能
パッケージの詳細:
カートン,パレット,木製のケース,または顧客のパッケージの要求に応じて
受渡し時間:
30営業日
支払条件:
出荷前に30％のデポジット + 70％t/t
供給の能力:
月あたり20セット
ギャラリー
Hard Alloys Batch Sintering Furnace / Vacuum Induction Furnace Practical
製品説明
Hard Alloys Batch Sintering Furnace / Practical Vacuum Induction Furnace
Batch Sintering Furnace Application:
Batch Sintering Furnace Widely used in rare earth permanent magnet materials, hard alloys, ceramic materials, titanium alloys and other materials vacuum sintering and diamond tool sintering (welding) and vacuum heat treatment process. The series of furnace type structure is mature and practical, and the furnace type and configuration are more. It is a general-purpose equipment used in the field of powder metallurgy sintering.
| Volume (L) | 36 | 96 | 175 | 432 | 784 |
| Effective heating zone (mm) | 300X300X400 | 400X400X600 | 500X500X700 | 600X600X1200 | 700X700X1600 |
| Limit temperature (°C) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Power (KW) | 60 | 90 | 150 | 210 | 300 |
| Temperature control method | Japanese island electric thermostat | ||||
| Vacuum system | Slide valve pump + Roots pump or increase diffusion pump as required | ||||
| Rated power supply voltage (V) | 380V | ||||
| Rated heating voltage (V) | According to the design, configure the transformer | ||||
Batch Sintering Furnace Technical parameters
- Inflation pressure ≤ 0.1MPa (absolute pressure)
- High temperature metal/graphite material heating system selection to facilitate different material requirements. (This item is user selectable)
- The main components of the control system are brand-name products to minimize the failure rate.
- The control system is equipped with alarm functions such as over-temperature, over-pressure and water-breaking. The system can automatically process according to the needs, which can reduce the damage to the equipment and ensure the safety of personnel.
- The temperature control system uses Japan Island Electric.
