Caratteristiche
Informazioni di base
Luogo di origine:
Cina (Mainland)
Marca:
Yuji
Certificazione:
ISO CE
Numero di modello:
scaldacqua della biomassa
Documento:
Brochure del prodotto PDF
Termini di pagamento e di spedizione
Quantità di ordine minimo:
1 set
Prezzo:
Negoziabile
Imballaggi particolari:
Confezione in legno
Tempi di consegna:
15 giorni
Termini di pagamento:
L/c, t/t
Capacità di alimentazione:
5 set al mese
Galleria
Durable Biomass Steam Boiler Enhanced Heat Transfer Environmental Protection
Descrizione del prodotto
Product Discription
Series Biomass Fired water Boiler
The furnace plate is 1600 mm. The side of the furnace body is equipped with a wall of water cooling and a surface of radiation water heating.*ISotto 1600.Important.The furnace melting process is introduced.
Body configuration, water -cooled wall board 160, interna l solution 160, 1600, 1600 *14, police 57 *3, 159 *6, 133 *6, 130, before and after police use, with high combustion rate.
Product Features
1. Easy installation:
Boilers are usually equipped with fast -fitting equipment that facilitates transportation and installation equipment, greatly shortens the building cycle and offers users a comfortable environment.
2, operation failed:
The boilers are ready, the water circulation is smooth and the cooling is timel
3. Maintenance:
It is easy to open the box in front of the kettle, and the staff can check it easily and clearly.These are good conditions for proper operation.
4.Total combustion
The coating system is reasonable, the water circulation is smooth and the cooling is timely.
5. Life and sustainability:
The ice is an excellent and advanced production installation with strict quality control, with quality assurance for each new pot.
6, low noise level:
The boiler is characterised by a low temperature of the gas from the combustion chamber, a high -performance scrubber, low noise, etc., which meets national environmental requirements.
.
Technical Parameters
Main Technical Parameters of Series Biomass Hot Water Boiler
| Thermal Power | MW | 0.7 | 1.4 | 2.1 | 2.8 | 4.2 | 5.6 | 7 |
| Outlet Pressure | MPa | 1.0 | 1.0 | 1.0 | 1.0 | 1.0/1.25 | 1.0/1.25 | 1.0/1.25 |
| Outlet Temperature | ℃ | 95 | 95 | 95 | 95 | 95/115 | 95/115 | 95/115 |
| Feed Water Temperature | ℃ | 70 | 70 | 70 | 70 | 70 | 70 | 70 |
| Thermal Efficiency | / | ≥83% | ||||||
| Fuel | / | Biomass particles | ||||||
| Fuel Consumption | Kg/h | 174.3 | 348.6 | 517 | 687.2 | 1024 | 1374.3 | 1708 |
| Heating area | m2 | 35.2 | 79.8 | 114.2 | 168 | 207.6 | 300.5 | 391 |
| Grate area | m2 | 1.97 | 3.2 | 4.8 | 5.5 | 7.04 | 11.7 | 13.6 |
| Power consumption | Kw | 18 | 26 | 31.5 | 34 | 62.4 | 76.4 | 87.2 |
| water volume | m3 | 5.1 | 5.58 | 6.95 | 9.3 | 14 | 17.8 | 20.5 |
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
| Thermal Power | MW | 0.7 | 1.4 | 2.1 | 2.8 | 4.2 | 5.6 | 7 | |
|
Transport Dimension
|
L | mm | 5100 | 6140 | 6330 | 6880 | 7290 | 7800 | 8500 |
| W | mm | 2200 | 2600 | 2700 | 2700 | 3190 | 3400 | 3400 | |
| H | mm | 2900 | 3300 | 3300 | 3300 | 3700 | 3700 | 3700 | |
| Mainframe Transport Weight | / | t | 15 | 18 | 24 | 27 | 31 | 33 | 41 |
| Outlet Water Valve | DN | mm | 80 | 100 | 125 | 125 | 150 | 200 | 200 |
| Feed Water Valve | DN | mm | 80 | 100 | 125 | 125 | 150 | 200 | 200 |
| Safety Valve Diameter | DN | mm | 1*32 | 1*50 | 2*40 | 2*40 | 2*50 | 2*50 | 2*50/80 |
| Drain Valve Pipe Diameter | DN | mm | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 |
| Chimney Diameter | φ | mm | 280 | 350 | 410 | 410 | 530 | 720 | 750 |
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
