Đặc trưng
Thông tin cơ bản
Nguồn gốc:
Trung Quốc
Hàng hiệu:
OEM
Chứng nhận:
CE Certification
Số mô hình:
OEM
Tài liệu:
Sổ tay sản phẩm PDF
Điều khoản thanh toán và vận chuyển
Số lượng đặt hàng tối thiểu:
Có thể thương lượng
Giá bán:
Có thể thương lượng
chi tiết đóng gói:
Thùng carton, pallet, vỏ gỗ hoặc theo yêu cầu gói của khách hàng
Thời gian giao hàng:
30 ngày làm việc
Điều khoản thanh toán:
Tiền gửi 30% + 70% t/t trước khi vận chuyển
Khả năng cung cấp:
20 bộ mỗi tháng
Phòng trưng bày
OEM Graphite Furnace Systems , High Temperature Vacuum Furnace 1600 ° C
Mô tả sản phẩm
OEM Graphite Furnace Systems , High Temperature Vacuum Furnace 1600 ° C
Application of Graphite Furnace Systems
Graphite Furnace Systems Widely used in powder metallurgy injection molding (MIM) sintering, rare earth permanent magnet materials, hard alloys, ceramic materials, titanium alloys and other materials vacuum sintering and diamond tool sintering (welding) and vacuum heat treatment process. The series of furnace type structure is mature and practical, and the furnace type and configuration are more. It is a general-purpose equipment used in the field of powder metallurgy sintering.
Graphite Furnace Systems Technical parameters :
- Inflation pressure ≤ 0.1MPa (absolute pressure)
- High vacuum/medium vacuum configurations are available freely depending on material process requirements. (This item is user selectable)
- The control of the equipment is automatic control throughout the whole process. Automatic and manual operation can achieve bumpless switching. The vacuum degree, temperature and heating power can be automatically recorded during the operation of the equipment, and the data in the production process can be viewed at any time. The device is controlled by a combination of a touch screen and a programmable controller (PLC) for easy and intuitive operation.
- The main components of the control system are brand-name products to minimize the failure rate.
- The control system is equipped with alarm functions such as over-temperature, over-pressure and water-breaking. The system can automatically process according to the needs, which can reduce the damage to the equipment and ensure the safety of personnel.
- The temperature control system uses Japan Island Electric.
| Volume (L) | 36 | 96 | 175 | 432 | 784 |
| Effective heating zone (mm) | 300X300X400 | 400X400X600 | 500X500X700 | 600X600X1200 | 700X700X1600 |
| Limit temperature (°C) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Power (KW) | 60 | 90 | 150 | 210 | 300 |
| heating method | Resistance heating | ||||
| Vacuum system | Slide valve pump + Roots pump or increase diffusion pump as required | ||||
| Rated heating voltage (V) | According to the design, configure the transformer | ||||
| Vacuum limit (Pa) |
2×10-3Pa
|
||||
