Đặc trưng
Thông tin cơ bản
Nguồn gốc:
Trung Quốc (Đại lục)
Hàng hiệu:
Yuji
Chứng nhận:
ISO CE
Số mô hình:
Nồi hơi nước nóng sinh khối
Tài liệu:
Sổ tay sản phẩm PDF
Điều khoản thanh toán và vận chuyển
Số lượng đặt hàng tối thiểu:
1 bộ
Giá bán:
Có thể thương lượng
chi tiết đóng gói:
Gói gỗ
Thời gian giao hàng:
15 ngày
Điều khoản thanh toán:
L/C, T/T.
Khả năng cung cấp:
5 bộ mỗi tháng
Phòng trưng bày
Horizontal Industrial Hot Water Boiler System Low Noise With Water Cooling Wall
Mô tả sản phẩm
Product Discription
Series Biomass Fired water Boiler
The plate is 1600mm.On the side of the furnace tower there is a water cooling wall and a heating surface for radioactive water.
Body configuration, water -cooled wall structure 160, internal solution 160, 1600, 1600 *14, police 57 *3, 159 *6, 133 *6, 130, before and after police use, high combustion speed.
Product Features
1. Easy to install:
Boilers are usually equipped with a quick installation device, which facilitates the transport and installation of the equipment, significantly shortens the construction cycle and provides comfort to users.
2. Operational failure:
The boiler equipment is complete, the water circulation is smooth and the cooling is done on time.
3.Maintenance equipment:
It is easy to open the drawer in front of the boiler and the staff can check it easily and clearly. These are good conditions for proper operation.
4. Total combustion
The coating system is reasonable, the water circulation is smooth and cooling is on time.
5. Life and sustainability:
Freezing is an excellent, advanced production equipment, and quality control is strict. Each new boiler has a quality guarantee.
6. Low noise level:
The boiler is characterised by a low temperature of emissions of gases from the chamber, high -performance scrubbers, low -noise air, etc., which meet national environmental requirements.
.
Technical Parameters
Main Technical Parameters of Series Biomass Hot Water Boiler
| Thermal Power | MW | 0.7 | 1.4 | 2.1 | 2.8 | 4.2 | 5.6 | 7 |
| Outlet Pressure | MPa | 1.0 | 1.0 | 1.0 | 1.0 | 1.0/1.25 | 1.0/1.25 | 1.0/1.25 |
| Outlet Temperature | ℃ | 95 | 95 | 95 | 95 | 95/115 | 95/115 | 95/115 |
| Feed Water Temperature | ℃ | 70 | 70 | 70 | 70 | 70 | 70 | 70 |
| Thermal Efficiency | / | ≥83% | ||||||
| Fuel | / | Biomass particles | ||||||
| Fuel Consumption | Kg/h | 174.3 | 348.6 | 517 | 687.2 | 1024 | 1374.3 | 1708 |
| Heating area | m2 | 35.2 | 79.8 | 114.2 | 168 | 207.6 | 300.5 | 391 |
| Grate area | m2 | 1.97 | 3.2 | 4.8 | 5.5 | 7.04 | 11.7 | 13.6 |
| Power consumption | Kw | 18 | 26 | 31.5 | 34 | 62.4 | 76.4 | 87.2 |
| water volume | m3 | 5.1 | 5.58 | 6.95 | 9.3 | 14 | 17.8 | 20.5 |
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
| Thermal Power | MW | 0.7 | 1.4 | 2.1 | 2.8 | 4.2 | 5.6 | 7 | |
|
Transport Dimension
|
L | mm | 5100 | 6140 | 6330 | 6880 | 7290 | 7800 | 8500 |
| W | mm | 2200 | 2600 | 2700 | 2700 | 3190 | 3400 | 3400 | |
| H | mm | 2900 | 3300 | 3300 | 3300 | 3700 | 3700 | 3700 | |
| Mainframe Transport Weight | / | t | 15 | 18 | 24 | 27 | 31 | 33 | 41 |
| Outlet Water Valve | DN | mm | 80 | 100 | 125 | 125 | 150 | 200 | 200 |
| Feed Water Valve | DN | mm | 80 | 100 | 125 | 125 | 150 | 200 | 200 |
| Safety Valve Diameter | DN | mm | 1*32 | 1*50 | 2*40 | 2*40 | 2*50 | 2*50 | 2*50/80 |
| Drain Valve Pipe Diameter | DN | mm | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 | 3*40 |
| Chimney Diameter | φ | mm | 280 | 350 | 410 | 410 | 530 | 720 | 750 |
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
